Monitoring Penggunaan Daya Listrik Sebagai Implementasi Internet Of Things Berbasis ESP8266

  • I Gusti Putu Mastawan Eka Putra Politeknik Negeri Bali
  • I Ketut Darminta Politeknik Negeri Bali


One implementation of the Internet of Things (IoT) conducted in this study to realize the system
of monitoring and control of electrical energy usage-based Wireless Sensor Network (WSN).
This research method is the design of wireless sensor nodes that can measure the electrical
parameters of alternating current (AC) as effective voltage, effective current, active power,
apparent power, power factor and total electrical energy consumption by using modules
ESP8266 as a liaison with a Wi-Fi. Calculation of electrical parameters obtained from
ATmega328P microcontroller ADC readings of a step-down transformer that is used as a
voltage sensor and sensor SCT013 used as AC current sensors will be transmitted to the server
over the network from a Wi-Fi Access Point (AP). ESP8266 modules are programmed using
AT-Command proven to reliably measure can transmit data simultaneously with serial data
format of the wireless sensor node to a server using TCP / IP protocol. Monitoring power
consumption via the internet which are designed in the research, either through the Android
application and web browser proven to be reliably able to show some electrical parameters with
the same data than the data logger recaps taken from SD-Card installed in the wireless sensor

How to Cite
PUTRA, I Gusti Putu Mastawan Eka; DARMINTA, I Ketut. Monitoring Penggunaan Daya Listrik Sebagai Implementasi Internet Of Things Berbasis ESP8266. Prosiding Sentrinov (Seminar Nasional Terapan Riset Inovatif), [S.l.], v. 3, n. 1, p. TE313-TE327, nov. 2017. ISSN 2477-2097. Available at: <>. Date accessed: 01 oct. 2022.