Parameter Mesin EDM Sinking untuk Mengoptimalkan Respon pada Material Aisi H13 Menggunakan Metode Taguchi – Fuzzy

  • Eko Yudo Politeknik Manufaktur Bangka Belitung
  • Diah Kusuma Pratiwi Universitas Sriwijaya

Abstract

Technological developments in manufacturing and market demand vary across complex product
requirements and high degree of precision and hardness of high strength materials in which many nonconventional
machines such as EDM sinking are used for the manufacturing process. The purpose of this
study is to determine the contribution of EDM process parameters in order to be able to determine the
value of the right process parameter setting and simultaneously. Parameters varied current, on time, off
time and machining voltage. This study used an experimental design of the Taguchi method with an
orthogonal L16 44 matrix. The Taguchi-Fuzzy combination was used as an optimization method by
experimenting 2 times. The optimization results show that the contribution of each parameter on all
responses simultaneously is 41.35% current, 37.90% on time energy, 10.11% off time and 5% machining
voltage. KPA with a certain target, maximum LPM, LKE and KP are both obtained minimum values of
current 15A, energy on time 300ms, off time 5ms and machining voltage 12V.

Published
2017-11-23
How to Cite
YUDO, Eko; PRATIWI, Diah Kusuma. Parameter Mesin EDM Sinking untuk Mengoptimalkan Respon pada Material Aisi H13 Menggunakan Metode Taguchi – Fuzzy. Prosiding Sentrinov (Seminar Nasional Terapan Riset Inovatif), [S.l.], v. 3, n. 1, p. TM50-TM61, nov. 2017. ISSN 2477-2097. Available at: <http://proceeding.sentrinov.org/index.php/sentrinov/article/view/273>. Date accessed: 12 june 2021.